Manual Laserliner MultiMeter (page 14 of 60) (English, German, Dutch, Danish, French)

646773

Zoom out

Zoom in

1/60

• If you are working with voltages higher than 25 V AC / 60 V DC,

exercise extreme caution. Touching the electrical conductors at

such voltages poses a risk of life-threatening electric shocks.

• If the device comes into contact with moisture or other conductive-

residue, work must not be carried out under voltage. At and above

voltages of 25 V AC / 60 V DC, the presence of moisture creates

the risk of life-threatening electric shocks. Clean and dry the

device before use. When using the device outdoors, make sure

that the weather conditions are appropriate and/or that suitable

protection measures are taken.

• Before taking any measurements, make sure that both the area to

be tested (e.g. a line), the test device and the accessories used

(e.g. connection cable) are in proper working order. Test the device

by connecting it to known voltage sources (e.g. a 230 V socket in

the case of AC testing or a car battery in the case of DC testing).

The device must no longer be used if one or more of its functions

fail or the battery charge is weak.

• The device must be isolated from all current sources before opening

the cover to change the battery(ies) or fuse(s). Do not switch on

the device with the cover open.

• Observe the safety precautions of local and national authorities

relating to the correct use of the device and any prescribed safety

equipment (e.g. electrician‘s safety gloves).

• If you have to take hold of the measuring spikes, do so by the

grip sections only. Do not touch the measuring contacts whilst

the measurement is being taken.

• Make sure that you always select the correct connections and

rotary switch position with the correct measuring range for the

measurement to be carried out.

• Disconnect the power supply to the electrical circuit before

measuring or checking the diodes, resistance or battery charge.

Make sure that all high-voltage capacitors are discharged.

To check, remove the measuring leads of the device from

the test piece before changing the mode.

• When connecting to a voltage, always connect the black

measuring lead rst before the red lead. Follow the reverse

procedure when disconnecting.

• Only the original measuring leads may be used. Their voltage,

category and ampere rated powers must match those of the

measuring device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiMeter in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 5,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner MultiMeter Manual

Product: