646771
7
Zoom out
Zoom in
Previous page
1/84
Next page
DE
07
MultiFinder Plus
Besonderheiten bei verschiedenen Materialien
Es können durch folgende Materialien evtl. keine Holzbalken
entdeckt werden:
– Bodenfliesen aus Keramik
– Teppichböden mit gepolsterter Rückseite
– Tapeten mit Metallfasern oder Metallfolie
Frisch gestrichene, feuchte Wände. Diese müssen
mindestens eine Woche lang trocknen.
Verwenden Sie in Problemfällen Metal-Scan, um Nägel oder
Schrauben in Trockenmauern zu lokalisieren, die bei einem
Balken in senkrechter Reihe angeordnet sind.
Falls sich elektrische Leitungen, Metall- oder Kunst-
stoffrohre in der Nähe einer Gipsfaserplatte befinden
oder diese berühren, werden diese vom MultiFinder Plus
unter Umständen als Balken erkannt.
!
Tipp 1: Zwischen beiden Markierungen ist die Balkenmitte.
Tipp 2: Achten Sie auf die Ausgangsposition: Setzen Sie das
Gerät an eine Stelle auf, hinter der sich kein Balken befindet.
Andernfalls wird ein Fehler angezeigt (ERROR). Fehlerbe-
hebung: Das Gerät ein paar Zentimeter von der aktuellen Stelle
weg bewegen und die Messung erneut beginnen.
Tipp 3: Halten Sie zur Vermeidung von Störungen während
des Abtastvorgangs Ihre freie Hand oder sonstige Objekte
mindestens 15 cm vom MultiFinder Plus entfernt.
Tipp 4: Der MultiFinder Plus findet nur die äußere Kante von
Doppel balken, die evtl. um Türen, Fenster und Ecken ange-
bracht sind.
Tipp 5: Stellen Sie sicher, dass Sie tatsächlich auf einen Balken
gestoßen sind. Überprüfen Sie dazu, ob andere Balken auf
beiden Seiten in gleichmäßigen Abständen vorhanden sind,
in der Regel 30, 40 oder 60 cm. Überprüfen Sie zusätzlich an
mehreren Stellen direkt über und unter der ersten gefundenen
Stelle, ob es sich um einen Balken handelt.
Tipp 6: Texturierte Decken: Die Decke muss mit einem Schutz-
karton abgedeckt werden.
Hinweis: Bei Objekten, die sich sehr tief in der Wand befinden,
kann es vorkommen, dass kein voller Ausschlag angezeigt
wird.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner MultiFinder Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiFinder Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info