646115

Laserliner MultiClamp-Meter Pro Manual

19
Zoom out
Zoom in
Previous page
1/84
Next page
MultiClamp-Meter Pro
19
GB
12
Voltage detection, non-contact
(AC warning)
The non-contact voltage detector
integrated in the meter is able to
detect AC voltages from 100 V to
600 V. Switch the device on and run
the voltage sensor along the object
to be tested (5 - 10 mm). The display
(9) lights up if AC voltage is detected.
Non-contact voltage detection is no substitute for
conventional voltage testing. As the device detects an
electrical Ö eld, it will react even to static charge.
!
The single-pole phase test is not suitable for checking
for zero voltage. To do this, you need to carry out a
two-pole phase test.
!
Voltage detection, single-pole phase test
Flashlight function
Backlight
Calibration
13
14
15
To switch on the × ashlight, press and hold down the
corresponding button. The light switches itself off
automatically as soon as the button is released.
To switch the backlighting on, press the „Hold“ button (11)
and hold it down for 2 seconds. Press the „Hold“ button twice,
to switch the backlighting off.
The meter needs to be calibrated and tested on a regular
basis to ensure it produces accurate measurement results. We
recommend carrying out calibration once a year.
Remove the black test prod from the device. Turn the rotary
switch to position „V AC/DC“ and connect the red test prod
to the phase or neutral conductor. The red display (9) only
lights up if the phase conductor is live. When the single-pole
phase test is carried out on the outer conductor, the indicator
function may be adversely affected under certain conditions
(e.g. when insulating personnel protective equipment is used
or at insulated locations).
Manual_MultiClamp-Meter_Rev.0710_GB.indd 19 12.08.2010 16:10:30 Uhr
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner MultiClamp-Meter Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiClamp-Meter Pro in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info