Manual Laserliner LiveTester Plus (page 10 of 48) (English, German, Dutch, Danish, French, Italian, Polish, Spanish, Finnish)

646761

Zoom out

Zoom in

1/48

The device is designed for performing a quick test of

the FI/RCD tripping function and is not a substitute

for a complete acceptance or retest in accordance with

national and international standards (e.g. EN 50110-1

(VDE 0105), (VDE 0100).

If the FI circuit breaker does not trip, there is

a life-threatening fault that must be rectified

by a qualified electrician.

3. The line-side FI/RCD circuit

breaker trips when the

„TEST“ button is pressed

(3 seconds).

2. Before FI/RCD is tripped, make sure that no sensitive devices

(e.g. PC) will be switched off unintentionally. During the test,

the mains voltage is switched off in the entire phase circuit.

Do NOT continue if the RCD 30 mA indicator (7)

is NOT on!

1. Plug the device into the

socket. Make sure that the

word TOP is at the top.

2 FI/RCD test

The socket outlet with earthing contact CEE 7/4 Type F

is not protected against polarity reversal. The warning

„L/N Reverse“ should therefore also be considered

as correct. It is recommended to use uniform socket

wiring throughout the building installation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner LiveTester Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 5,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner LiveTester Plus Manual

Product: