646114

Laserliner LanCable Checker Manual

11
Zoom out
Zoom in
Previous page
1/136
Next page
GB
11
LAN CableChecker
3
4
Only the sender is required for this application. Connect the
cable terminals to the RJ11 connection and to the object to
be tested, and switch the device to TEST mode. If one or more
diodes (1 to 8) × ash at the same time, the test circuit is closed. If
none of the diodes × ashes, the measuring circuit is interrupted.
See also Tip 1.
Continuity test
Trace cables
Do not perform any measurements in the vicinity of or directly adjacent to live or
signal-carrying cables. There is a risk of fatal electric shocks and damage to the
device.
!
RJ 11
redblack
Diodes 1 to 8 ƃ ash
alternately
Diodes 1 to 8 do not
ƃ ash
RJ 11
!
a
Connect the cable terminals to the sender‘s RJ11 connection and to the required line, and
switch the sender to SCAN mode. Then use the receiver to search for the line, with the
test mode button (15) held down (see Fig. a). To achieve the maximum measuring depth,
set the receiver signal volume as high as it will go (14).
Tip 2: Depending on the application concerned, it may be advisable to change the type of
signal. To do this, press button (7) in SCAN mode. If the status LED (6) × ashes green, this
indicates a modulated signal; if it × ashes red, this indicates a constant signal.
– Make the measuring circuit zero-potential.
– Shields in the cable and in the surrounding area (metal coverings, metal sup-
ports, etc.) reduce the range of the receiver.
Manual_LAN-CableChecker_Rev.1010_GB.indd Abs1:11 25.10.2010 14:48:04 Uhr
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner LanCable Checker at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner LanCable Checker in the language / languages: All languages as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info