646752
11
Zoom out
Zoom in
Previous page
1/80
Next page
LAN-Check
11
4
5
GB
TEST mode
1. Connect cable to the main device and cable connector
2. Briey press „TEST / DEBUG“ button (12)
During each measurement the LEDs initially light up briey one after
the other.
Positive test
The LEDs of twisted pairs (1 - 4) as well as the „OK“ LED (9) will light
if there is no wiring fault or break.
Negative test /wiring fault
The LED „Short“ (6), LED „Miswire“ (7) and/or LED „Reversal“ (8)
‚will light accordingly if there is one or several wiring faults. The
LED of the faulty twisted pairs will ash simultaneously.
Negative test / break
The corresponding LEDs will not light if there is a cable break in one
or several twisted pairs. (See „Wiring faults“)
Always check the condition of the batteries before using the
tester. The LEDs will light weakly if the battery charge is low.
False measurements are possible.
!
DEBUG mode
1. Connect cable to the main device and cable connector
2. Press and hold „TEST / DEBUG“ button (12)
During each measurement the LEDs initially light up briey one after
the other. The twisted pairs are then checked one after the other.
Positive test
If the twisted pair to be tested is wired correctly, the corresponding
LED will briey ash, then light together with the „OK“ LED and
then go out.
Negative test /wiring fault
If the twisted pair to be tested is wired incorrectly, initially the
corresponding LED will briey ash. The LED will then light together
with the LEDs of the twisted pairs associated with the fault. At the
same time, the LED „Short“ (6), LED „Miswire“ (7) or the LED
„Reversal“ (8) will also light.
Example
The twisted pairs 3 - 6 of the cable
are reversed and there is a short-
circuit in the twisted pairs 1 - 2
and 4 - 5.
Flashing
ON
ON
Flashing
ON
Flashing
ON
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner LAN-Check at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner LAN-Check in the language / languages: All languages as an attachment in your email.

The manual is 6,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info