Manual Laserliner GreenLine-Laser 2 P (page 11 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish)

646748

Zoom out

Zoom in

1/64

GreenLine-Laser 2 P

ENGLISH 11

Battery operation

The device can also be operated with

standard alkaline batteries (6 x type AA).

To do so, open the battery compartment

(10), remove the rechargeable batteries

and insert the new batteries as shown by

the symbols. Check for correct polarity.

Replace the cover. If the LED (13) blinks

constantly, the batteries must be

changed.



Note: If the device is too far off the horizontal (more than 3°), a warning

signal will sound and, if switched on, the lasers will blink. Align the device

using the adjustable feet or place on a more level surface. The round vial

(8) is provided as an aid to alignment.



Note: Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry

batteries must not be recharged. Used batteries must not be disposed of as

household waste. Please take them to a collection point for used batteries or for

special waste. Ask your local authority for further details. Batteries with the

recycling symbol can also be returned to our dealerships or to our Technical

Service.

Charging the batteries:

• Fully charge the batteries before use.

• Plug the charger/mains adapter into the power socket and into socket (9).

• When LED (13) starts to blink, recharge the batteries.

Switching on: Turn the On/Off switch (3) to the right, thereby releasing the

transport securing device. The lasers can now be individually activated via the

control field (12).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner GreenLine-Laser 2 P in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 1,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner GreenLine-Laser 2 P Manual

Product: