Greenline-Laser 1 Pro
ENGLISH12
Due to the physiology of the human eye green appears brighter to us than
red. Therefore green lasers are highly visible compared to customary red
lasers. They enable applications on dark surfaces, longer distances and
performance of work in very bright ambient light.
Floor applications
• Put the device on the floor and switch it on using
the on/off switch (6).
• A green laser line is projected. The intensity
distribution and length of the laser line can be
adjusted using the adjustment wheel (8). Thus
maximum visibility of the laser line is guaranteed,
particularly on dark floors, in very bright ambient
light or on uneven surfaces.
• The spirit levels (2,3) do not have any function in this application area, see
also the note on page 10.
• 45° and 90° angles can be installed with the optional installation plate (Art.
no.: 036.01), see next page.
Wall applications
• First fix one of the two fastening pins (10) in the
desired position on a drywall.
• Then attach the device with the fastening hole at
the front to the pin, pre-adjust it horizontally and/or
vertically with the spirit levels (2,3) and fix it on the
wall with the second pin.
• Align the device exactly horizontally and/or
vertically with the eccentric adjustment and the
fastening pins. Adjust the intensity distribution if
required (Adjustment wheel 8).
• IMPORTANT: For horizontal levelling always carry out alignment with the
upper spirit level!
Parallel projection
The body edges can be used to carry out parallel
translations and depict 90° angles.