646138
20
Zoom out
Zoom in
Previous page
1/224
Next page
If points A2 and A3 are more than 1 mm / 10 m (DuraMax) / 0,5 mm / 10 m (DuraMax XPro)
apart on either the X or Y axis, the device is in need of adjustment. Contact your authorised
dealer or else the UMAREX-LASERLINER Service Department.
!
Performing the calibration check
3. Position the device as near as possible to the wall at the height of point A1.
4. Turn the device through 180° and mark point A3. The difference between points A2 and A3
is the tolerance for the X axis.
5. To check the Y axis, repeat steps 3 and 4.
Preparing the calibration check
It is possible for you to check the calibration of the laser. To do this, position the device midway
between 2 walls, which must be at least 5 metres apart. The best calibration results are achieved
if the device is mounted on a tripod. Switch on the device and determine the marking points using
the laser receiver. When doing this, set the laser receiver to the maximum precision level.
1. Mark point A1 on the wall.
2. Turn the device through 180° and mark point A2. You now have a horizontal
reference between points A1 and A2.
A2
2.
1.
A1
A1
A2
A1
A3
A2
4.
3.
<
0,5 mm / 10 m = OK
(DuraMax XPro)
<
1 mm / 10 m = OK
(DuraMax)
A2
A3
20
GB
Manual_DuraMax_XPro_Rev.0910_A5.indd 20Manual_DuraMax_XPro_Rev.0910_A5.indd 20 27.09.2010 17:06:50 Uhr27.09.2010 17:06:50 Uhr
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DuraMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DuraMax in the language / languages: All languages as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info