646138
15
Zoom out
Zoom in
Previous page
1/224
Next page
DuraMax / DuraMax XPro
If the device has been placed on a surface with too much of a slope (more than 5°), there is a
warning sound, the prism head remains stationary and the laser starts to flash. The device must
then be placed on a more even surface.
!
slope/man function LED off: Automatic alignment
!
auto
The device levels itself automatically to within a range of ± 5°. During the set-up phase, the laser
flashes and the prism head remains stationary. When levelling is complete, the laser lights up
continuously and rotates at maximum speed. Refer also to the sections about "Sensor Automatic"
and "ADS Tilt".
Horizontal levelling
Horizontal: Position the device on a level surface or on a tripod.
– Press the "ON/OFF" switch
Anti-shake function
This function enables you to use the device when it is still in the set-up phase.
The laser will continue to rotate whilst it is being aligned by the automatic
sensor. This makes device set-up easier, as it enables the laser to be set to
a required height by means of a crank tripod or a wall bracket, for example.
It also means that the laser can be used on vibrating surfaces and in windy
conditions. This function can be used in combination with the single slope
function and all laser modes except adjustment mode. The function is activted
via the anti-shake button: when it is pressed, the anti-shake LED flashes
quickly. IMPORTANT: Precision is adversely affected during the set-up phase.
1
2
3
4
5
6
7
8
9
10
Rotary speed for selection,
0 / 150 / 500 rpm
Scan mode
Hand receiver mode
Adjustment mode: toggle
between X and Y axes
Cover for adjustment mode
buttons / battery compartment
Infrared signal emitter
Positioning button (rotate to the
left) / calibration mode: save
Positioning button (rotate to the
right) / calibration mode: axis
switch-over
Plus/minus buttons for setting the
inclination with the single slope
function and the manual slope
function
Adjustment mode enter button:
save new setting
Optional accessories: Commander 50
8
7
10
5
4
3
2
1
9
6
9
15
GB
Manual_DuraMax_XPro_Rev.0910_A5.indd 15Manual_DuraMax_XPro_Rev.0910_A5.indd 15 27.09.2010 17:06:31 Uhr27.09.2010 17:06:31 Uhr
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DuraMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DuraMax in the language / languages: All languages as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info