646138

Laserliner DuraMax Manual

12
Zoom out
Zoom in
Previous page
1/224
Next page
Caution: Prior to using the laser, you must read the safety instructions for laser class 3R thoroughly.
Warning signs must not be removed from the laser measuring device! Do not look directly into the
beam. Lasers must be kept out of reach of children. Never intentionally aim the device at people.
This is a quality laser measuring device and is 100% factory adjusted within the stated tolerance.
For reasons of product liability, we must also draw your attention to the following: Regularly check
the calibration before use, after transport and after extended periods of storage. We also wish to
point out that absolute calibration is only possible in a specialist workshop. Calibration by yourself is
only approximate and the accuracy of the calibration will depend on the care with which you proceed.
Laser radiation!
Avoid direct exposure to
the eyes.
Laser class 3R
< 5 mW Ċ 635 - 670 nm
EN60825-1:2007-10
General safety instructions
Please read the operating instructions as well as the enclosed brochures "Guarantee and
additional notices" and "Laser class 3R safety instructions". Follow the instructions they
contain. Safely keep these documents for future reference.
!
High-precision rotary laser for horizontal levelling
over extremely long distances.
– Laser modes: spot, scan, rotary and hand receiver mode
– All functions can be controlled remotely.
– optional SensoLite 310: Laser receiver range up to 300 m radius
– optional SensoMaster 400: Laser receiver range in excess of 300 m radius.
With longer laser receiver unit and millimetre exact distance reading for laser level.
Special product features and functions
The rotary laser aligns itself automatically. It is set to the required initial position (to within
an operating angle of ± 5°) and the automatic system then performs the necessary fine adjustment, with
two electronic measurement sensors detecting the X and Y axes.
The anti-drift system (ADS) prevents erroneous or inaccurate measurements. How it works:
continuous monitoring of the alignment of the laser is activated 30 seconds after the ADS is switched
on. If the device moves due to the influence of external factors or the laser loses its height reference,
the laser will come to a standstill. Additionally, the laser flashes and the tilt LED is lit continuously. To
continue working, press the tilt button again or switch the device off then on again. Erroneous and
inaccurate measurements are thus prevented simply and reliably.
12
GB
Manual_DuraMax_XPro_Rev.0910_A5.indd 12Manual_DuraMax_XPro_Rev.0910_A5.indd 12 27.09.2010 17:06:23 Uhr27.09.2010 17:06:23 Uhr
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DuraMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DuraMax in the language / languages: All languages as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info