646122

Laserliner DigiLevel Pro 30 Manual

6
Zoom out
Zoom in
Previous page
1/19
Next page
DigiLevel Pro 30/60/120
Memory functions:
• With the memory function (6), the current measurement result can be
saved in the internal memory, whereby the current memory position
(M1 - M9) is displayed during the saving process (9).
• If more than 9 results are saved, the old ones are overwritten.
• The memory retrieval button (4) can be pressed to show the most
recently saved result in the display (8). By repeatingly pressing the
memory retrieval button (4), all the stored results (9) can be retrieved.
• Return to normal (6)
GB
10
GB
11
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2007-10
Warranty:
The warranty is valid for 2 years from the date of purchase. The warranty does
not cover damage caused by improper use or storage, normal wear and tear, or
defects which only insignifi cantly impair the value of the product or its
functioning. Any tampering by unauthorised persons will render this warranty
void. In the event that you need to claim warranty, please take the complete
device together with all information and the invoice to one of our dealers or send
it in to UMAREX-Laserliner.
Electronic measuring
precision:
+/- 0,1° at 0° and 90°,
+/- 0,2° at 2° – 89°
Display accuracy 0°- 1° 2 decimal places
Display accuracy 1°-90° 1 decimal place
Vial accuracy
+
0,5 mm/m
Laser class 2 < 1 mW (EN 60825-1:2007-10)
Laser wavelength 650 nm
Working temperature 0°C...40°C (32°F...104°F)
Storage temperature -20°C ... 65°C
Power supply 2 x 1.5V (Typ AAA/LR03)
Dimensions 30 60 x 33 x 300 mm
Dimensions 60 60 x 33 x 610 mm
Dimensions 120 60 x 33 x 1220 mm
Weight 30/ 60/ 120 0,4 / 0,8 / 1,2 kg
Article-No. 30/ 60/ 120 081.212A/ 081.210A/ 081.216A
Subject to technical change without notice 10.2008
Technical data:
Spirit level function:
• The alignment to the measuring surface (14) is shown by the vertical and
horizontal vials (11, 12).
• Use the vials for optimum vertical and horizontal alignment, and the
electronic slope angle display for any desired angle of slope.
• With the aid of the magnets (13), the DigiLevel Pro can be affi xed to any
magnetic surface.
Calibration:
• (A) Place the unit with its measuring edge (14) down on a straight sur-
face and mark the positions of the unit‘s ends on the underlying surface
(see Fig. below). Switch the unit on (2) and press the REF button (1) until
CAL 1 starts blinking. Shortly thereafter an acoustic signal will sound and
CAL 2 will appear in the display. Now turn the unit around horizontally
(end-for-end) by 180° (B) such that its ends are positioned opposite where
they previously were but again exactly at the underlying surface marks
(reverse measurement). Again press the REF button (1) until CAL 2 blinks.
The subsequent acoustic signal concludes the process.
• Follow-up test: The unit is properly calibrated when it displays the same
measurement value, i.e. the underlying surface‘s deviation from absolute
level, in both positions (0° and 180°).
Switching off:
• To switch off the DigiLevel, press the on/off switch (2) for at least
3 secs. When not in use, the DigiLevel switches off automatically.
(A)
(B)
0°
180°
General safety instructions
Attention: Do not look directly into the laser beam! The laser may not
get into the hands of children! Do not point this device unnecessarily
toward persons.
Note: Regularly check the unit‘s calibration before use, after transporting
and extended periods of storage.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DigiLevel Pro 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DigiLevel Pro 30 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info