646717
9
Zoom out
Zoom in
Previous page
1/68
Next page
DampCheck
09
4
DampCheck
DampCheck
GB
Wood
The location to be measured should be
untreated, free of knots, dirt and resin.
Measurements should not be made on
the end faces of wood because these
areas dry particularly quickly such that
they produce incorrect measurement
results.
Mineral building materials
Be aware that walls (or surfaces) made
of several different materials, or even
variations in the material‘s consistency,
can cause measurement results to be
falsied. Perform multiple comparative
measurements.
Building moisture measuring range
Wood moisture measuring range
< 0,2% All LEDs off
≥ 0,2% to < 0,7% Green LED ashing
≥ 0,7% to < 0,9% Yellow LED ashing
≥ 0,9% Red LED ashing
< 6% All LEDs off
≥ 6% to < 16% Green LED ashing
≥ 16% to < 20% Yellow LED ashing
≥ 20% Red LED ashing
To measure material moisture
Wood with a relative material moisture level greater than 20%
should not be used for burning. The optimum calorific value of
wood is achieved at a level of <15%.
!
Dry/wet indicator
In addition to the numerical moisture value, the LEDs (green, yellow
and red) provide a rough estimation whether the material is dry
(green), moist (yellow) or wet (red).
The following types of wood in Group A can be read off directly:
beech, linden, willow, ebony and teak. A correction factor of 2 - 3%
must be added when measuring types of wood in Group B
(oak, maple, alder, spruce, birch).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner DampCheck at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner DampCheck in the language / languages: All languages as an attachment in your email.

The manual is 6,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info