Manual Laserliner CombiRangeXtender 40 (page 6 of 80) (All languages)

646712

Zoom out

Zoom in

1/80

Use the laser receiver CRX 40 for levelling over longer distances or when the

laser lines are no longer visible. Switch on with button F. The central area (I)

and acoustic signal (G) LEDs light up and a signal sounds.

Working with the laser receiver

Set the line laser to hand receiver mode. The laser lines will now pulsate with

high frequency, making the laser lines darker. The laser receiver can detect

these pulsating laser lines up to a maximum distance of 40 m.

Now move the receiver field (B) of the laser receiver through the laser lines

upwards and downwards (horizontal laser line) and/or sideways (vertical laser

line) until the centre LED lights up. Now mark the horizontal and/or vertical

reference dimension.

Line lasers: This button switches hand receiver mode on and off.

CRX 40: The sensitivity of the central area can be adjusted

using the button.

Minimum distance from the laser device about 3m. Pay attention that

the laser lines are not reflected by reflective surfaces. Such reflections

can lead to false indications.

The light intensity of the laser lines is greatest at the centre and

diminishes toward the ends. This can reduce the maximum reception

range of the laser receiver.

Laser

37 mm

Continuous tone

(middle LED)

mark the reference

Slow peeping

(lower LED)

Rapid peeping

(upper LED)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner CombiRangeXtender 40 in the language / languages: All languages as an attachment in your email.

The manual is 6,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner CombiRangeXtender 40 Manual

Product: