646113

Laserliner CableTracer Pro Manual

16
Zoom out
Zoom in
Previous page
1/312
Next page
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“
completely. Follow the instructions they contain. Safely keep these documents for future reference.
!
Universal, × exible cable tracer set including sender and receiver.
– Non-contact tracing of the transmission signal by the receiver.
– Locates electrical cables, fuses, circuit breakers, metal pipes (such as heating pipes) and much more.
– Locates interrupted cables in existing installations and short-circuits in existing installation cables.
– May be used with or without mains voltage, up to max. 400V.
– Display of DC and AC voltages up to max. 400V.
– Single-pole search, for optimal cable and object search in greater depths.
– Two-pole search, for locating fuses, short-circuits and ground fault circuit interrupters.
– High transmission frequency of 125 KHz allows for exact and fail-safe locating performance without
power failures.
– Signal coding allows as many as 7 senders to be used with one receiver and is thus ideal for complex
installation settings.
– Integrated AC voltage detector recognises and locates live lines.
– Permanent AC voltage warnings increase safety with sender and receiver.
– Automatic and manual modes for adjustment to the particular measuring conditions.
– Integrated illumination of measuring points, powerful LED lighting.
– Overvoltage category CAT III (according to EN 61010-1, max. 300V) and all lower categories. The
devices and accessories must not be used in overvoltage category CAT IV (e.g. low voltage installation
sources).
– The device must only be used in accordance with its intended purpose and within the scope of the
speciÖ cations.
– Only the original measuring leads may be used. Their voltage, category and ampere rated powers must
match those of the measuring device.
– Isolate the device from all current sources before opening the battery compartment cover.If possible, do
not work alone.
– Hold the device by the grip sections only. Do not touch the test prods during measurement.
– If you are working with voltages higher than 25 V AC/60 V DC, exercise extreme caution. Touching the
electrical conductors at such voltages poses a risk of life-threatening electric shocks.
Function / Application
Safety instructions
How it works
Measurement is performed using one or more senders and one receiver. The sender feeds coded signals
into the cable to be checked. The signal is a modulated current creating an electromagnetic Ö eld around
the conductor. The receiver recognises this Ö eld, decodes it and is then able to Ö nd and locate cables with
this signal.
16
GB
Manual_CableTracer-Pro_Rev.0710_GB.indd 016 02.09.2010 11:28:07 Uhr
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner CableTracer Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner CableTracer Pro in the language / languages: All languages as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info