646158

Laserliner AutoPoint-Laser 5 Manual

8
Zoom out
Zoom in
Previous page
1/72
Next page
If points A2 and A3 are more than 2 mm / 10 m apart the device is in need of calibration.
Contact your authorised dealer or else the UMAREX-LASERLINER Service Department.
!
Preparing the calibration check
It is possible for you to check the calibration of the laser. To do this, position the device midway
between 2 walls, which must be at least 5 metre apart. Switch the device on. The best calibration
results are achieved if the device is mounted on a tripod.
1. Mark point A1 on the wall.
2. Turn the device 180° and mark point A2. You now have a horizontal reference between points
A1 and A2.
A1
A2
2.
1.
A1
A3
A2
A2
A1
4.
3.
A3
A2
<
2 mm / 10 m = OK
Performing the calibration check
3. Position the device as near as possible to the wall at the height of point A1. Adjust the device
in the X axis.
4. Turn the device through 180° and mark point A3. The difference between points A2 and A3
is the tolerance for the X axis.
5. To check the Y axis, repeat steps 3 and 4.
4
Technical Data (Subject to technical changes 02/2011)
Self-levelling range ±3°
Precision ± 2 mm / 10 m
Operating range (depending on room illumination) ca. 50 m
Power supply 3 x 1,5V AA / ca. 5 h
Laser wavelength 635 nm
Laser Class 2, < 1 mW
Dimensions (W x H x D) / Weight 65 x 93 x 118 mm / 0,8 kg
Operating temperature / Storage temperature 0°C … +50°C / -10°C … + 70°C
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at: www.laserliner.com/info
08
GB
Manual_AutoPoint-Laser_5_Rev.0211_A5.indd 08 03.03.2011 9:58:35 Uhr
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AutoPoint-Laser 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoPoint-Laser 5 in the language / languages: All languages as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info