Manual Laserliner AutoLine-Laser 3D (page 13 of 136) (All languages)

646129

Zoom out

Zoom in

1/136

AutoLine-Laser 3D

2,5 m

< 3 mm = OK

Checking the horizontal line

Position the device about 5 m from a wall and

switch on the cross laser. Mark point B on the

wall. Turn the laser cross approx. 2.5 m to the

right and mark point C. Check whether the

horizontal line from point C is level with point B

to within ± 3 mm. Repeat the process by turning

the laser to the left.

Checking the vertical line

Position the device about 5 m from a wall. Fix a plumb bob with a line of

2.5 m length on the wall, making sure that the bob can swing freely. Switch

on the device and align the vertical laser to the plumb line. The precision is

within the specified tolerance if the deviation between the laser line and

the plumb line is not greater than ± 1.5 mm.

Regularly check the calibration before use, after transport and after

extended periods of storage.

Guarantee, product care and disposal

This device complies with all necessary standards

for the free movement of goods within the EU.

This product is an electric device and must be collected

separately for disposal according to the European Directive

on waste electrical and electronic equipment.

Further safety and supplementary notices at:

www.laserliner.com/info

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoLine-Laser 3D in the language / languages: All languages as an attachment in your email.

The manual is 6,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner AutoLine-Laser 3D Manual

Product: