646129
10
Zoom out
Zoom in
Previous page
1/136
Next page
10
2
LASER LASER LASER LASER
3
GB
Horizontal and vertical levelling
Release the transport restraint, set the ON/OFF switch to „ON“.
The horizontal laser line appears. The laser lines can be switched
on individually with the selection button.
The transport restraint must be released for horizontal and vertical
levelling. The laser lines flash and a signal sounds as soon as the
device is outside the automatic levelling range of 2,5°. Position
the device such that it is within the levelling range.
!
Hand receiver mode
Optional: Working with the laser receiver RX
Use an RX laser receiver (optional) to carry out
levelling at great distances or when the laser
lines are no longer visible. To work with a laser
receiver, switch the line laser to hand-held
receiver mode by keeping button 6 (hand-
held receiver mode on / off) pressed. The laser
lines will now pulsate with high frequency,
making the laser lines darker. The laser receiver
can detect these pulsating laser lines.
Observe the laser receiver‘s operating instructions for line lasers.
!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AutoLine-Laser 3D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoLine-Laser 3D in the language / languages: All languages as an attachment in your email.

The manual is 6,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info