Manual Laserliner AutoLine-Laser 3D Plus (page 8 of 136) (All languages)

646128

Zoom out

Zoom in

1/136

Three-dimensional laser with a horizontal and two vertical

360° laser circles and slope function for aligning tiles, wall

studding, windows, doors etc.

Read the operating instructions and the enclosed brochure „Guarantee

and additional notices“ completely. Follow the instructions they

contain. Safely keep these documents for future reference.

General safety instructions

Caution: Do not look directly into the beam. Lasers must be kept out of reach

of children. Never intentionally aim the device at people. This is a quality laser

measuring device and is 100% factory adjusted within the stated tolerance.

For reasons of product liability, we must also draw your attention to the

following: Regularly check the calibration before use, after transport and

after extended periods of storage. We also wish to point out that absolute

calibration is only possible in a specialist workshop. Calibration by yourself

is only approximate and the accuracy of the calibration will depend on the

care with which you proceed.

Laser radiation!

Do not stare into the beam

or observe it directly with

optical instruments.

Class 2M laser

< 5 mW · 640 nm

EN 60825-1:2007-10

Always turn off all lasers and latch the pendulum in place before

transporting, ON/OFF switch in its „OFF“ position!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoLine-Laser 3D Plus in the language / languages: All languages as an attachment in your email.

The manual is 6,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner AutoLine-Laser 3D Plus Manual

Product: