577699

Laserliner AutoCross-Laser 2 Pro Manual

7
Zoom out
Zoom in
Previous page
1/112
Next page
AutoCross-Laser 2 Pro
07
GB
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“
completely. Follow the instructions they contain. Safely keep these documents for future reference.
!
Function / Application
Cross-line laser vertical and horizontal alignment
– The slope-mode feature is an extra that permits gradients to be laid out.
– Individually switchable laser lines
– Out-Of-Level: Is indicated by optical and acoustic signals
when the unit is outside its self-levelling range.
– The unit‘s two magnetic wall brackets allow it to be used as a stand-alone device
or in combination with others - on the wall or attached to magnetic objects.
– Ideal for mounting on drywall construction proÖ les
– Automatic levelling range 3°, accuracy 2 mm / 10 m
Caution: Do not look directly into the beam. Lasers must be kept out of reach of children. Never
intentionally aim the device at people. This is a quality laser measuring device and is 100% factory
adjusted within the stated tolerance. For reasons of product liability, we must also draw your attention
to the following: Regularly check the calibration before use, after transport and after extended periods
of storage. We also wish to point out that absolute calibration is only possible in a specialist workshop.
Calibration by yourself is only approximate and the accuracy of the calibration will depend on the care
with which you proceed.
Laser radiation!
Do not stare into the beam
or observe it directly with
optical instruments.
Class 2M laser
< 5 mW · 635 nm
EN 60825-1:2007-10
General safety instructions
Special product features
Automatic alignment of the device with a magnetically dampened pendulum system.
The device is brought into initial position and aligns itself autonomously.
Transport LOCK: The device is protected with a pendelum lock during transport.
Special high performance laser diodes generate even brighter laser lines as units with
PowerBright Technology do. They remain visible over longer distances, in bright ambient
lighting conditions and on dark surfaces.
RX-READY technology enables line lasers to be used even in unfavourable light conditions.
The laser lines pulsate at a high frequency and this can be picked up by special laser
receiversover long distances.
Manual_ACL_2_Pro_Rev0113.indd 07 29.01.13 14:10
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AutoCross-Laser 2 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoCross-Laser 2 Pro in the language / languages: All languages as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info