AquaPro
ENGLISH
SensoLite 120:
(Diodes also on the back)
13
3
5
6
7
10
1
2
13
9
Optional accessories: SensoLite laser receiver
1 Perimeter marking groove
2 Laser beam reception field
3 SpotLite marking LED
4 Spirit level
5 Fastening screw
6 Universal mount (optional)
7 Fixing lever
8 volume control
9 Battery compartment (rear side)
10 hand receiver mode /
SensoLite 310: switchover
precision range
free-hand range
11 LCD indicator (rear side)
12 LCD indicator
13 LED indicator
2
3
5
6
7
10
12
11
1
4
SensoLite 310:
8
8
9
1
2
SensoLite is able to detect the laser beam at a great
distance. Move the SensoLite up and down through
the laser beam until the middle indicator appears. Mark
the measured height at the perimeter marking groove.
SpotLite marking: The projected light beam at the
height of the laser beam simplifies precise marking and
prevents parallax error.
Note: The laser receiver has two tolerance settings: Precision and free-hand
setting. On the SensoCommander 120, the settings are indicated by LEDs:
precision setting: green; free-hand setting: orange. On the SensoLite 310
changeover between the settings is done by the button (10).
