685295
27
Zoom out
Zoom in
Previous page
1/32
Next page
TROUBLESHOOTING
PAGE 27
PROBLEM CAUSE SOLUTION
1. Temperature will not reach the setting
on the dial.
1. Keep the lid closed.
2. Adjust the damper on the chimney to more
open or more closed.
3. Change the control dial to a higher or lower
temperature setting.
4. Excessively hot, cold or windy conditions
can keep the grill from reaching the desired
setting. Move grill to a more protected area.
GRILL DOES NOT
REACH THE SET
TEMPERATURE
1. Pellets not reaching the fire pot
1. Verify there are pellets in the hopper.
2. Verify auger is rotating.
3. If there are pellets in the hopper and the
auger is turning, it may take up to 5 minutes
for the pellets to reach the fire pot.
4. If the auger is not rotating, check the auger
for jams and clear.
5. If the problem cannot be resolved contact
the manufacturer.
NO PELLETS
REACHING
THE FIRE POT
1. Pellets building up and fail to ignite.
1. Remove excess pellets and clean ash from
the fire pot and ignitor rod area.
2. If the problem cannot be resolved contact
the manufacturer.
PELLETS BUILDUP
IN FIRE POT AND
DO NOT LIGHT
IN FIRE POT
1. Lid hinge movement is not smooth. 1. Add cooking oil to the moving pins
and pivoting bolts on the hinge.
2. If movement is still not smooth, check
hexnuts to make sure they are not too
tight. Lid movement should be without
resistance.
LID HINGE
STICKING AND
POPPING
®
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 470106 Pelett Kettle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 470106 Pelett Kettle in the language / languages: English as an attachment in your email.

The manual is 9,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info