Manual Landmann 42306 - Avalon 6 (page 47 of 147) (English, French, Spanish)

685287

Zoom out

Zoom in

1/147

Avalon 6 Burner Gas Grill

A Natural gas hose and quick connect are not

supplied with this product but are available as an

accessory for purchase from your local dealer.

1. A professionally-installed shut-off valve between

the supply piping and the socket is always

recommended, but but may not be required,

by the National Fuel Gas Code. The socket

connection must always be made outdoors.

2. Coat the gas supply pipe nipple with gas resistant

pipe dope or teﬂon tape. Screw socket on gas as

supply pipe ( house gas souce) shown in Figure A

below, and wrench-tighten.

3. Pull back the sleeve on the quick disconnect

socket and insert the unattached end of the gas

hose into the socket. Release the sleeve and

continue pushing the hose into the socket until

the sleeve snaps into the locked position. See

Figure B.

4. When the quick disconnect socket and the gas

hose are connected, a valve in the socket opens

automatically to permit full gas ﬂow. When the

gas hose is disconnected, the valve in the socket

instanly and positively shuts off the ﬂow of gas.

Because the valve in the socket positively shuts off

the ﬂow of gas, the grill can be disconnected from the

gas source by disconnecting the gas hose from the

quick disconnect socket. The socket should be left

attached to the gas source ( house piping) Figure C

below, shows properly connected hose and socket.

With proper assembly, the gas hose connot be

removed without pushing the quick disconnect sleeve

back. To disconnect, push sleeeve back and pull plug

out of sleeve (this automatically shuts off gas).

Please Note: Only hose and assemblies that are

C.S.A. listed for natural gas, manufactured gas,

mixed gas and for liqueﬁed petroleum and for LP

Gas-Air mixtures on basis of 0.64 speciﬁc gravity

for 1000 BTU’s per cubic foot of gas at 0.3 in. water

column pressure drop. Only ANSI Z21.54 approved

hose should be used with this grill.

The appliance and its individual shut off valve must

be disconnected from the gas supply piping system

during any pressure testing on that system at test

pressures in excess of 1/2 psig (3.5kPa).

The appliance must be isolated from the gas supply

piping system by closing its individual manual shutoff

valve during any pressure testing of the gas supply

piping system at test pressure equal to or less than

1/2 psi (3.5kPa).

Connecting Grill to A Natural Gas Source

The quick disconnect socket should

never be connected to the grill. Direction

of gas ﬂow is indicated on the socket.

Figure A

Figure C

Figure B

Quick disconnect socket

Gas hose Sleeve

House piping

Do not use hard metal piping of any kind

to connect this type of grill to natural

gas source. Use only hose speciﬁed by

manufacturer. Using hard metal piping

or convoluted metal tubing is an unsafe

pratice. Movement of the grill can cause

breakage of metal pipe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 42306 - Avalon 6 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 26,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Landmann 42306 - Avalon 6 Manual

Product: