Manual Landmann 12660 - Miton 4.1 (page 13 of 28) (English)

685307

Zoom out

Zoom in

1/28

Miton PTS 4.1

Troubleshooting

If there is a fault despite due care, this chapter may help you to resolve the fault.

Fault Possible cause Remedy

There is a smell of gas Leak in the gas system 1. Close the cylinder valve imme-

diately.

2. Prevent any ﬂame or spark for-

mation (do not switch on any

electrical appliances)

3. Tighten all connections on the

gas system

4. Check all components of the

gas system for visible damage;

replace defective parts with ori-

ginal spare parts

5. Check for leaks using a leak

detector

Burner does not ignite Gas cylinder is empty Replace the gas cylinder

Cylinder valve is closed Open the cylinder valve.

The nozzle on the adjusting ele-

ment (behind front panel) is not

inserted into the burner hose.

Visual inspection, if necessary

adjust nozzle and connection hose.

The ignition cable is not in contact

with the electronic pulse ignition

Conduct a visual inspection, con-

nect if necessary

Distance between the spark plug

and gas outlets on the burner is

incorrect

Visual inspection; correct if neces-

sary

Nozzle on adjusting element

(underneath front panel) is

blocked.

Clean the adjuster jet with a need-

Other gas system blocked The gas system should be cleaned

by a specialist

Barbecue temperature too low Pre-heating time too short Grill unit coverClose the lid and set

the ﬂame regulator to max

Gas outlets on the burner are

blocked

Remove blockage from burner

Strong ﬂare-up Fatty foods Remove any large areas of fat pri-

or to barbecuing or place the meat

on a grill plate or reduce the bar-

becue temperature

Deﬂagration or bubbling noise Flashback caused by blockages in

the burner.

1. Close the cylinder valve imme-

diately.

2. Wait 3 minutes and then

switch the barbecue back on

3. If the malfunction reoccurs,

disassemble and clean the bur-

ner

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 12660 - Miton 4.1 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Landmann 12660 - Miton 4.1 Manual

Product: