Manual Land Rover Range Rover - 2000 (page 22 of 48) (English)

626352

Zoom out

Zoom in

1/48

Washer jets & wiper blades

152

FRONT WIPER BLADE REPLACEMENT

To renew a wiper blade, lift the wiper arm

away from the windscreen, press the retaining

clip (1) and slide the wiper blade down the

arm to remove.

Locate the new blade assembly on the arm

and push into engagement until the blade is

retained by the clip.

Always fit replacement wiper blades that are

identical to the original specification.

REAR WIPER BLADE REPLACEMENT

The rear wiper arm is inaccessible in its

stowed position (under a cover at the top of

the tailgate). To change the wiper blade, it is

necessary to stop the wiper arm during its

travel as follows:

Set the rear screen wiper operating, then open

the upper tailgate when the wiper is in a near

vertical position. The wiper will stop as soon

as the tailgate is openend.

Turn the starter switch to the ’0’ position to

prevent the wiper from operating, lower the

upper tailgate and then replace the wiper

blade (as described for the front wiper blade).

The wiper will continue operating as soon as

the starter switch is returned to position ’I’.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Range Rover - 2000 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Land Rover Range Rover - 2000 Manual

Product: