626352
10
Zoom out
Zoom in
Previous page
1/48
Next page
Engine compartment
140
Oil filter renewal
To avoid draining the oil pump, it is essential
that the engine is filled with oil to the correct
level BEFORE the filter is removed. It is
therefore recommended that the engine oil is
renewed before work on the filter commences.
1. Clean the area around the filter head and
place a container beneath the filter.
2. Using a strap type filter wrench, unscrew
the filter anti-clockwise and discard it.
3. Smear the sealing ring of the new filter
with clean engine oil, and then fit the filter
tightening clockwise until it is securely in
position by hand or to 15Nm (13 lbf.ft).
DO NOT overtighten.
4. Start and run the engine. Do not rev the
engine until the oil pressure warning light
extinguishes. Check for oil leaks around
the filter and drain plug.
5. Stop the engine, wait a few minutes, then
check the oil level and top up if necessary.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Land Rover Range Rover - 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Range Rover - 2000 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info