626335
148
Zoom out
Zoom in
Previous page
1/191
Next page
Workshop maintenance
145
POWER STEERING PUMP DRIVE BELT
V8 engine
(without air-conditioning)
Check belt deflection with thumb pressure
mid-way between the crankshaft and steering
pump pulley. Movement should be between 4
and 6 mm (0.16 and 0.25 in). If adjustment is
necessary;
Turn the starter switch to position ’0’ and
disconnect the battery negative lead.
Slacken the two pivot bolts (2).
Slacken the pump adjustment clamp bolt
(3).
Move the pump in the required direction to
obtain the correct tension.
WARNING
DO NOT lever, or apply pressure to the pump
body to tension the belt, as damage to the
pump may occur.
Tighten adjustment clamp bolt (3).
Tighten the two pivot bolts (2).
Connect the battery, run the engine for five
minutes at a fast idle and then switch off.
Re-check belt tension.
148


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Land Rover Defender 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Land Rover Defender 90 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info