681042
58
Zoom out
Zoom in
Previous page
1/82
Next page
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 5: Advanced wireless LAN configuration
57
EN
In the 5 -GHz band, the automatic search for vacant WLAN channels can lead
to several simultaneous test transmissions from multiple access points, with
the result that they do not find each other. This stalemate situation can be
avoided with the appropriate "Channel selection scheme":
Master: This access point takes over the leadership when selecting a free
WLAN channel.
Slave: All other access points will search for a channel until they have
found a transmitting Master.
Thus it is recommended for the 5 GHz band that one central access point
should be configured as 'Master' and all other point-to-point partners should
be configured as 'Slave'. In the 2.4 GHz band, too, this setting simplifies the
establishment of point-to-point connections if the automatic channel search
is activated.
It is imperative that the channel selection scheme is configured cor-
rectly if the point-to-point connections are to be encrypted with
802.11i/WPA (a master as authentication server and a slave as client).
5.2.5 Configuration of P2P connections
In the configuration of point-to-point connections, entries have to be made
for the point-to-point operation mode and the channel selection scheme,
along with the MAC addresses or station names of the remote sites.
Configuration with
LANconfig
For configuration with LANconfig you will find the settings for P2P connec-
tions under the configuration area 'Interfaces' on the 'Wireless LAN' tab.
The configuration of the P2P connections can also be carried out with
the WLAN Wizards in LANconfig.
MASTER ANTENNA
SLAVE
ANTENNA
SLAVE
ANTENNA
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom OAC-54-1 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom OAC-54-1 Wireless in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom OAC-54-1 Wireless

Lancom OAC-54-1 Wireless User Manual - German - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info