681042
34
Zoom out
Zoom in
Previous page
1/82
Next page
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 3: Basic configuration
33
EN
Accessing the device with WEBconfig
To carry out a configuration with WEBconfig, you need to know how to con-
tact the device. Device behavior and accessibility for configuration via a Web
browser depend on whether the DHCP server and DNS server are active in the
LAN already, and whether these two server processes share the assignment in
the LAN of IP addresses to symbolic names. WEBconfig accesses the LANCOM
either via its IP address, the device name (if configured), or by means of any
name if the device has not yet been configured.
Following power-on, unconfigured LANCOM devices first check whether a
DHCP server is already active in the LAN. Depending on the situation, the
device can either enable its own DHCP server or enable DHCP client mode. In
the second operating mode, the device can retrieve an IP address for itself
from a DHCP server in the LAN.
If a LANCOM Wireless Router or LANCOM Access Point is centrally
managed from a LANCOM WLAN Controller, the DHCP mode is swit-
ched from auto-mode to client mode upon provision of the WLAN
configuration.
Network without a DHCP server
Not for centrally
managed LANCOM
Wireless Routers or
LANCOM Access
Points
In a network without a DHCP server, unconfigured LANCOM devices enable
their own DHCP server service when switched on and assign IP addresses,
information on gateways, etc. to other computers in the LAN (provided they
are set to automatic retrieval of IP addresses – auto DHCP). In this constella-
tion, the device can be accessed by every computer with the auto DHCP func-
tion enabled with a Web browser under IP address 172.23.56.254.
With the factory settings and an activated DHCP server, the device for-
wards all incoming DNS requests to the internal Web server. This
means that a connection can easily be made to set set up an uncon-
figured LANCOM by entering any name into a Web browser.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom OAC-54-1 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom OAC-54-1 Wireless in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom OAC-54-1 Wireless

Lancom OAC-54-1 Wireless User Manual - German - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info