681042
29
Zoom out
Zoom in
Previous page
1/82
Next page
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 3: Basic configuration
28
EN
Protecting the configuration
Wireless LAN details
Security settings
3.1.1 TCP/IP settings
TCP/IP configuration can be performed in two different ways: Either fully auto-
matically or manually. No user input is required if TCP/IP configuration is per-
formed automatically. All parameters are set by the Setup Wizard on its own.
When manual TCP/IP configuration is performed the wizard prompts for the
usual TCP/IP parameters: IP address, network mask etc. (more on this later)
The fully automatic TCP/IP configuration is only possible in certain network
environments. For this reason the Setup Wwizard analyses the connected LAN
to see whether fully automatic configuration is possible or not.
New LAN – fully automatic configuration possible
The setup wizard offers to configure TCP/IP fully automatically if no network
devices connected have yet been configured. This usually happens in the fol-
lowing situations:
Only a single PC is going to be attached to the LANCOM OAP/OAC-54-1
Wireless
Setting up a new network
Fully automatic TCP/IP configuration will not be offered if you are integrating
the LANCOM OAP/OAC-54-1 Wireless into an existing TCP/IP LAN. In this case
please continue with the section 'Required information for manual TCP/IP
configuration'.
The result of fully automatic TCP/IP configuration is as follows: The LANCOM
OAP/OAC-54-1 Wireless is assigned the IP address '172.23.56.254' (network
mask '255.255.255.0'). The integrated DHCP server is also activated so that
the LANCOM OAP/OAC-54-1 Wireless can assign the devices in the LAN IP
addresses automatically.
Should you still configure manually?
Fully automatic TCP/IP configuration is optional. Instead of this you can select
manual configuration. Make this selection after considering the following:
Select automatic configuration if you are not familiar with networks and
IP addresses.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom OAC-54-1 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom OAC-54-1 Wireless in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom OAC-54-1 Wireless

Lancom OAC-54-1 Wireless User Manual - German - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info