681042
24
Zoom out
Zoom in
Previous page
1/82
Next page
LANCOM OAP-54-1 Wireless – LANCOM OAC-54-1 Wireless
Chapter 2: Installation
23
EN
More information about using a LAN interface for DSLoL can be found in
the following information box ’LAN interface: exclusive or in parallel
for DSLoL.
PoE—the 'LAN In' connector of the supplied PoE Injector should be con-
nected via a normal Ethernet cable to an available network connection
socket in your local network (e.g. an available socket on a hub or switch)
and the PoE Injector connected with the electricity supply.
Information about the installation of PoE can be found in the information
box 'Power over Ethernet—elegant power supply over LAN cabling'
above.
Please observe the information in the documentation supplied with the
PoE Injector.
Use only the supplied PoE Injector for the power supply of the
LANCOM OAP/OAC-54-1 Wireless. Pay particular care not to connect
the PoE Injector to normal Ethernet devices!
Ready for operation? —the Power LED permanently lights up in green as
soon as the device receives power. The LEDs subsequently display the
operational status.
LAN interface: exclusive or in parallel for DSLoL
There are two principle DSLoL operation modes available. Either use the exclusive mode when
connecting your LANCOM Access Point directly to a DSL modem, or use the automatic mode
when connecting the Access Point to a hub or switch of a cable-bound LAN, and connect this
hub/switch again to the DSL modem. If
the Access Point is broadcasted as gate-
way via DHCP, computers in LAN and
WLAN can use the internet connection
simultaneously via one physical inter-
face. Set the desired mode in LANconfig
in the Interface settings of the DSLoL
interface.
DSLoL supports all PPPoE-based Internet access lines, as well as those that are sup-
plied with a access router with multiple fixed IP addresses (such as many SDSL busi-
ness lines).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom OAC-54-1 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom OAC-54-1 Wireless in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom OAC-54-1 Wireless

Lancom OAC-54-1 Wireless User Manual - German - 86 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info