680892
89
Zoom out
Zoom in
Previous page
1/97
Next page
LANCOM L-32x Access Point series
Chapter 8: Advice & assistance
88
EN
8 Advice & assistance
See this chapter for first-aid assistance if some of the typical problems should
occur.
8.1 No WAN connection can be established
After starting, the router attempts automatically to connect to the Internet
provider. During this phase, the Internet-connection status LED blinks green.
If successful, this LED switches to constant green. If contact cannot be made,
the WAN LED does not illuminate. This is generally due to one of the following
causes:
Problems with the cabling?
For the DSL connection, use only the connector cable supplied. This cable
must be connected to the Ethernet connector of the DSL modem The LED for
the WAN connection must illuminate in green to show that it is physically con-
nected.
Is the correct transmission protocol selected?
The transmission protocol is defined with the basic settings. The Basic Settings
Wizard actually sets the correct protocol for a wide variety of DSL providers. If
your DSL provider is unknown to the Wizard you have to set the protocol
yourself. The protocol specified by your DSL provider should work without pro-
blem.
You can check and adjust your protocol settings under:
LANconfig: Communication General Communication layers
WEBconfig: LCOS Menu Tree Setup WAN module Layer list
8.2 Slow DSL transmission
The speed of data transmission over an (Internet) DSL connection depends on
a number of factors, most of which are beyond the influence of normal users.
Along with bandwidth of your provider's connection, of decisive importance
is the provider's Internet connection and the load on the target Web page.
Several other factors in the Internet itself can also influence the transmission
speeds.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-320agn Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-320agn Wireless in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info