680892

Lancom L-320agn Wireless Manual

36
Zoom out
Zoom in
Previous page
1/97
Next page
LANCOM L-32x Access Point series
Chapter 3: Basic configuration
35
EN
3 Basic configuration
The basic configuration is conducted with a convenient Setup Wizard that
provides step-by-step guidance through the configuration and that requests
any necessary information.
Unconfigured LANCOM Access Points with standard factory settings
cannot be commissioned by means of the WLAN interface.
First of all this chapter presents the information that has to be entered for the
basic configuration. This first section will help you to gather up all of the
necessary data before you start the Wizard.
You subsequently enter this information into the Setup Wizard. Starting the
program and the following procedure are described step by step. LANconfig
and WEBconfig each have their own description. With all of the necessary
information collected in advance, this basic configuration can now take place
quickly and in ease.
At the end of this chapter we show you the necessary settings for the work-
place computers in the LAN so that they can access the device without pro-
blem.
For LANCOM Access Points that are unconfigured and in their factory settings,
the WLAN modules are switched off and set to the "Managed" operating
mode. The WLAN modules search the LAN for a LANCOM WLAN Controller
from which they can receive their WLAN-interface configuration profiles.
Once executed, the Basic Settings Wizard automatically resets the
WLAN-module operating mode to "Access Point". The WLAN interface then
has to be configured manually.
Only activate the Basic Settings Wizard if the Access Point is not to be
configured from a WLAN-Controller. Subsequently execute the WLAN
Wizard → WLAN Configuration.
3.1 Details you will need
The Basic Settings Wizard is used to set the L-32x Access Points basic TCP/IP
parameters and to protect the device with a configuration password. The fol-
lowing description of the information required by the wizard is divided into
the following configuration sections:
TCP/IP settings
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-320agn Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-320agn Wireless in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info