680892
32
Zoom out
Zoom in
Previous page
1/97
Next page
LANCOM L-32x Access Point series
Chapter 2: Installation
31
EN
LANCOM L-321agn
Wireless and
LANCOM L-322agn
dual Wireless only
Antennas – screw the antennas supplied to the back of the L-32x Access
Point. Depending on how the antennas are to be used, the 'Antenna
Grouping' parameter may need to be configured in order provide the
desired MIMO behavior ('Advanced Wireless LAN Configuration').
Antennas are only to be attached or changed when the device is swit-
ched off. Mounting or demounting antennas while the device swit-
ched on may cause the destruction of the WLAN module!
When assembling separately purchased antennas please note that the
maximum allowed transmission power of the wireless LAN according
to EIRP in the country in question may not be exceeded. The system
operator is responsible for adhering to the threshold values.
LAN – You can first connect the L-32x Access Point to your LAN. Plug in
one end of the supplied network cable (green connectors) to the LAN con-
nector on the device and the other end into an available network con-
nector socket in your local network or on a hub or switch. Alternatively
you can connect a single PC.
The LAN connector automatically recognizes the wiring (Auto MDI/X) and
the transfer rate (10/100/1000 Mbit with LANCOM L-320agn Wirelesss
and LANCOM L-321agn Wirelesss, 10/100 Mbit with LANCOM L-322agn
dual Wireless) by autosensing.
Information about the installation of PoE can be found in the information
box 'Power over Ethernet—elegant power supply over LAN cabling'.
DSLoL – if you wish to operate the access point in DSLoL mode you can
either connect the device directly to the DSL modem (exclusive mode) or
via a hub or switch in the wired LAN (automatic mode).
In exclusive mode, plug one end of the network cable supplied (green
connectors) into the LAN port of device and plug the other end into
the corresponding port on the DSL modem.
In automatic mode, plug one end of the supplied network cable
(green connectors) to the LAN port on device and the other end
into an available network connector socket in your local network (or
a free socket on a switch or hub).
Power supply – socket is for connecting the power supply unit pro-
vided.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-320agn Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-320agn Wireless in the language / languages: English as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info