680944
68
Zoom out
Zoom in
Previous page
1/102
Next page
Operating modes and functions
|
|
LANCOM Wireless L-11/IL-11
|
68
EN
4.4.2 DHCP—'on', 'off' or 'auto'?
The DHCP server can be set to three different states:
'on': The DHCP server is permanently active. The configuration of the
server (validity of the address pool) is checked when this value is entered.
When correctly configured, the device will be available to the net-
work as a DHCP server.
In the event of an incorrect configuration (e.g. invalid pool limits), the
DHCP server is disabled and switches to the 'off' state.
'off': The DHCP server is permanently disabled.
'auto': The server is in automatic mode. In this mode, after switching it
on, the device looks for other DHCP server within the local network.
The device then disables its own DHCP server if any other DHCP serv-
ers are found. This prevents the unconfigured device from assigning
addresses not in the local network when switched on.
The device then enables its own DHCP server if no other DHCP serv-
ers are found.
Whether the DHCP server is active or not can be seen in the DHCP statis-
tics.
The default state is 'auto'.
4.4.3 How are the addresses assigned?
IP address assignment
Before the DHCP server can assign IP addresses to the computers in the net-
work, it first needs to know which addresses are available for assignment.
Three options exist for determining the available selection of addresses:
The IP address can be taken from the address pool selected (start address
pool to end address pool). Any valid addresses in the local network can
be entered here.
It then uses the IP address '10.0.0.254' for itself and the address pool
'10.x.x.x' for the assignment of IP addresses in the network. In this state,
the DHCP server only assigns IP addresses and their validity to the com-
puters in the network, but not the other information.
If only one computer in the network is booted and requests an IP address via
DHCP with its network settings, a device with an activated DHCP module will
assign this computer an address. A valid address is taken from the pool as
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-11 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom L-11

Lancom L-11 User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info