680944
63
Zoom out
Zoom in
Previous page
1/102
Next page
|
Operating modes and functions
63
|
LANCOM Wireless L-11/IL-11
|
EN
address over the LAN to the router. Using the IP address, the router then
searches the IP routing table and finds the remote station that belongs to the
address, for example 'Provider_A'. Using this name, the router then checks
the ISDN name list and finds the call number for the corresponding remote
station that can be reached by ISDN, including the communication layer that
is to be used. The router also obtains the user name and password required
for login to Provider A from the PPP list.
When this is done, the router can establish a connection to the router of the
provider over the ISDN line. Once the connection has been established, the
router can forward the data packet to the Internet over the ISDN line.
You can find more information on IP networks, etc. in the technical documen-
tation provided on the CD.
The following sections introduce the ISDN name list and briefly describe the
parameters they contain, describe their connections to other lists and their
parameters, and how they are configured in the software.
For further information on the IP routing table, see the 'IP routing' section.
4.3.1 ISDN name list
The name list in the LANconfig can be found in the 'Communication' configu-
ration section on the 'Remote Stations' tab, or under /Setup/WAN-
module/ISDN-name-list during Telnet or terminal sessions.
To define the available remote sites, enter them in the name list with a suit-
able name and additional parameters:
Name
This name is used to identify the remote site in the router modules.
Subscriber number
This number should be dialed when the router actively establishes a con-
nection to the remote station.
If the remote station can be reached under a variety of subscriber num-
bers, enter the other numbers in the round-robin list.
If the remote station is available via a leased line, the number for a dial-
up backup connection can be entered here.
Timeouts
These times indicate the length of time the B channels should remain
active after:
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-11 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom L-11

Lancom L-11 User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info