680944
45
Zoom out
Zoom in
Previous page
1/102
Next page
|
Configuration and management
45
|
LANCOM Wireless L-11/IL-11
|
EN
TFTP
With TFTP you can use the writeflash command to install new firmware. To
transmit a new firmware version to a device with the IP address
194.162.200.17, you would enter the following command under Windows NT
for example:
tftp -i 194.162.200.17 put lc_wl1iu.200 writeflash
This command sends the corresponding file to the input IP address using the
writeflash command. Binary file transfer must be set for TFTP. However,
many systems have the ASCII format preset. This example for Windows NT
shows you how to achieve this by using the '-i' parameter.
The device is booted up following a successful firmware upload and this acti-
vates the new firmware switch directly. If an error occurs during the upload
(write error in the flash ROM, TFTP transmission error or similar) FirmSafe
activates the previous firmware. The configuration remains in operation.
With TFTP, other configuration commands can be performed too. The syntax
is best demonstrated with the following examples:
tftp 10.0.0.1 get readconfig file1: Reads the configuration from the device
with the address 10.0.0.1 and saves it as file1 in the current directory.
tftp 10.0.0.1 put file1 writeconfig: Writes the configuration from file1 to
the device with the address 10.0.0.1.
tftp 10.0.0.1 get dir/status/verb file2: Saves the current connection infor-
mation in file2.
3.8 What's happening on the line?
After the basic setup of the devices, further important information can be
gained with regard to the parameters still to be modified, especially by
observing the data flow on the various ports of the router.
In addition to the device statistics that can be read out during a telnet or ter-
minal session or with WEBconfig, a variety of other options are also avail-
able.
3.9 LANmonitor
The LANmonitor includes a monitoring tool with which you can view the most
important information on the status of your router on your monitor at any time
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom L-11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom L-11 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom L-11

Lancom L-11 User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info