680946
177
Zoom out
Zoom in
Previous page
1/182
Next page
Description of the menu options
ELSA LANCOM Wireless
R83
English
Version table
The version table displays the firmware version and serial number of the device.
Table firmsafe
This table provides the following details for the two firmware versions stored in the
device: the position in memory (1 or 2), status information (active or inactive), the version
number, the date, the size and the index (sequential number).
Enter the following command to activate an inactive firmware version:
set <position number> active.
ein.
Mode-firmsafe
Only one of the firmware versions stored in the device can be active at any one time.
When new firmware is loaded the inactive firmware is overwritten. You can decide
which firmware will be activated after the upload:
쮿
'immediate': The first option is to load the new firmware and activate it
immediately. The following situations can result:
The new firmware is successfully loaded and then operates as desired.
Everything is then in order.
However, if the new firmware does not operate correctly, it may not be possible
to communicate with the device after the restart. If an error occurs during the
upload, the device automatically reactivates the previous firmware version and
reboots the device.
쮿
'login': To prevent problems caused by defective firmware, the second option will
load the firmware and start it immediately.
In contrast to the first option, the firmsafe will wait until it has successfully
logged on over outband or inband (by telnet). The new firmware will only be
permanently activated when the login occurs successfully within the time set
under 'Timeout firmsafe'.
If the device no longer responds and it is therefore impossible to log in, the
firmware automatically loads the previous firmware version and reboots the
device with it.
쮿
'manual': The third option allows you to set a period (Timeout firmsafe) beforehand
for testing the new firmware. The device will start with the new firmware and wait
Ifc Module Version Serial number
Ifc LANCOM Business 4100 1.60.0012 / 30.06.1999 8427.000.020
Position Status Version Date Size Index
1 Inactive 1.60 23061999 690 6
2 Active 1.60 30061999 692 7
3 <Lader> 1.60 07061999 64 0
177


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom IL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom IL-2 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom IL-2

Lancom IL-2 User Manual - German - 186 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info