680946
172
Zoom out
Zoom in
Previous page
1/182
Next page
Description of the menu options
ELSA LANCOM Wireless
R78
English
쮿
EAZ/MSN(s)
: This option allows you to enter the call numbers to which the
LANCAPI
is to respond. If you wish to enter more than one number, place a
semicolon between the individual numbers.
쮿
Prio-out
: The priority for a port controls the option for breaking outgoing
connections via the
LANCAPI
router connections. Option '1' does not break router
connections, the setting '2' breaks only auxiliary connections of a router connection
with channel bundling, the selection '3' also breaks main channels of a router
connection.
Setup/WLAN-module
the WLAN module is configured using this menu:
WLAN-Domain The WLAN domain is entered here, i.e. the symbolic name that the
mobile stations use to find the base port. An ASCII string with a
maximum of 32 characters. The default setting is 'ELSA'.
Phy-channel The radio channel to be used by the base port. The possible values
are 1 to 14. However, the channels overlap due to the spread-
spectrum process, so that the entire radio band offers a maximum of 3
completely independent channels.
Not all channels are permitted in all countries (please see the table of
radio channels in the Appendix).
Packet size A value between 600 and 1600 that states the maximum size of
WLAN packets in bytes. Default: 1550.
Access-list This list can be used to explicitly exclude WLAN stations from data
communications with the LAN/base port. Alternatively, authorized
stations can be specified.
Enter the MAC addresses of stations in this list in other words, the
12-character hexadecimal numbers printed on the cards but without
separators, i.e. 00-60-B3-1F-02-11 would become 0060B31F0211.
This only denies the stations access to the LAN or WAN. Data
communications between stations in the WLAN via the base port
which typically serves as a relay is not affected.
Access-mode This positive/negative switch determines whether the list is to serve
as an authorization or exclusion. By default, the mode is set to
negative and the access list is empty, i.e. no stations are excluded
from data communications.
Protocol-list This list permits data packets to be blocked or permitted (depending
on the positive/negative setting of the switch) on the basis of their
protocol.
Every Ethernet frame contains a 16-bit identifier stating the Layer-3
protocol of its data. These can be entered in the list as hexadecimal
numbers.
Common protocols include:
0800 = IP
0806 = IP/ARP
8137 = IPX F0F0,
E0E0 = IPX
809B and 80F3 = Appletalk
6001 to 6007 = Decnet
80D5 and 0808 to 0D0D = IBM SNA
In this case as well, traffic is blocked between WLAN stations and the
LAN or WAN, but not between the WLAN stations themselves.
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom IL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom IL-2 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom IL-2

Lancom IL-2 User Manual - German - 186 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info