680946
162
Zoom out
Zoom in
Previous page
1/182
Next page
Description of the menu options
ELSA LANCOM Wireless
R68
English
Setup/IP-router-module/RIP-configuration
This option allows you to enter settings for the management of IP-RIP packets. The menu
has the following layout:
RIP-type
This option allows you to select the method to be used for handling the IP-RIP packets.
The different settings have the following meaning:
쮿
Off:
IP-RIP is not supported (default).
쮿
RIP-1:
RIP-1 and RIP-2 packets are received but only RIP-1 packets are sent.
쮿
R1-comp:
RIP-1 and RIP-2 packets are received. RIP-2 packets are sent as an IP
broadcast.
쮿
RIP-2:
Same as
R1-comp
except that all RIP packets are sent to the IP multicast
address 224.0.0.9.
R1-mask
If
RIP-1
is set, this option allows you to influence the management of network masks.
Therefore, these settings are required only for subnetting under
RIP-1
. The different
settings have the following meaning:
쮿
Class
(default): The network mask used in the RIP packet is derived directly from the
IP address class, i.e. the following network masks are used for the network classes:
Class A: 255.0.0.0
Class B: 255.255.0.0
Class C: 255.255.255.0
쮿
Address:
The network mask is derived from the first bit that is set in the IP address
entered. This and all high-order bits within the network mask are set. Thus, for
example, the address 127.128.128.64 yields the IP network mask 255.255.255.192.
쮿
Cl+Addr:
The network mask is formed from the IP address class and a part attached
after the address procedure. Thus, the above-mentioned address and the network
mask 255.255.0.0 yield the IP network mask 255.128.0.0.
Table-RIP
This option allows you to display the entries in the current dynamic IP routing table.
An IP-RIP routing table might, for example, have the following appearance:
/RIP-configuration Settings for IP-RIP operation
Type RIP compatibility switch
R1-mask Management of network masks
Table-RIP Dynamic IP routing table
IP-address IP netmask Time Distance Router
223.245.254.0 255.255.255.0 1 1 192.38.9.100
223.245.257.0 255.255.255.0 1 1 192.38.9.200
162


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom IL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom IL-2 in the language / languages: English as an attachment in your email.

The manual is 5,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom IL-2

Lancom IL-2 User Manual - German - 186 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info