680925
55
Zoom out
Zoom in
Previous page
1/71
Next page
LANCOM GS-1224 and LANCOM GS-1224P
쮿 Chapter 4: Operation of Web- based Management
54
EN
쮿 Broadcast Rate:
To enable the Broadcast Storm capability. User can use the drop-down
menu to select the number of frames. The setting range is 1k~1024k per
second.
Default: No Limit
쮿 Multicast Rate:
To enable the Multicast Storm capability. User can use the drop-down
menu to select the number of frames. The setting range is 1k~1024k per
second.
Default: No Limit
쮿 Flooded unicast Rate:
To enable the Flooded unicast Storm capability. User can use the drop-
down menu to select the number of frames. The setting range is
1k~1024k per second.
Default: No Limit
4.2.16 SNMP
Any Network Management System (NMS) running the Simple Network
Management Protocol (SNMP) can manage the managed devices equipped
with the SNMP agent, provided that the Management Information Base (MIB)
is installed correctly on the managed devices. SNMP is a protocol that is used
to govern the transfer of information between the SNMP manager and agent
and traverses the Object Identity (OID) of the Management Information Base
(MIB), described in the form of Structure Management Information (SMI). The
SNMP agent is running on the switch to response the request issued by the
SNMP manager.
Basically, it is passive except issuing the trap information. The switch supports
to turn on or off the SNMP agent. If you set the field SNMP “Enable”, the
SNMP agent will be started up. All supported MIB OIDs, including RMON MIB,
can be accessed via the SNMP manager. If the field SNMP is set “Disable”, the
SNMP agent will be de-activated, the related Community Name, Trap Host IP
Address, Trap and all MIB counters will be ignored.
쮿 SNMP Configuration
This function is used to configure SNMP settings, community name, trap
host and public traps as well as the throttle of SNMP. A SNMP manager
must pass the authentication by identifying both community names, then
it can access the MIB information of the target device. So, both parties
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom GS-1224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom GS-1224P in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom GS-1224P

Lancom GS-1224P User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info