681038
59
Zoom out
Zoom in
Previous page
1/71
Next page
Security settings 59
IntroductionInstallationConfigurationInternet AccessLinking NetworksRemote AccessSending FaxesSecuritySecurity
3. In the following windows, select the services/protocols the rule should be related to.
Then you define the source and destination stations for this rule and what actions will
be executed when the rule will apply to a data packet.
4. You finally give a name to the new rule, activate it and define, whether further rules
should be observed when the rule will apply to a data packet.
5. The wizard will inform you as soon as the entries are complete. Complete the configu-
ration with Finish.
Configuration under WEBconfig
Under WEBconfig it is possible to check and modify all parameters related to the protec-
tion of the Internet access under Configuration Firewall / QoS Rules Rule
Table.
The security checklist
The following checklist provides a comprehensive overview of all security settings for pro-
fessionals. Most of the points on this checklist are no subject of concern in simple confi-
gurations, since these generally adequate security settings are already implemented
during basic configuration and by the security wizard.
Note Detailed information on the security settings listed here can be found in the
reference manual.
Have you assigned a password for the configuration?
The simplest option for the protection of the configuration is the establishment of a
password. As long as a password hasn't been set, anyone can change the configura-
tion of the device. The field for entering the password is contained in LANconfig in the
'Management' configuration area on the 'Security' tab. It is particularly required to
assign a password to the configuration if you want to allow remote configuration.
Have you permitted remote configuration?
If you do not require remote configuration, then deactivate it. If you require remote con-
figuration, then be sure to assign a password protection for the configuration (see pre-
vious section). The field for deactivating the remote configuration is also contained in
LANconfig in the 'Management' configuration area on the 'Security' tab. Select here
under 'Access rights - of remote networks' for all types of configuration the option 'not
allowed'.
Have you provided the SNMP configuration with a password?
Also protect the SNMP configuration with a password. The field for protection of the
SNMP configuration with a password is also contained in LANconfig in the 'Manage-
ment' configuration area on the 'Security' tab.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom Business LAN R800 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom Business LAN R800 plus in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom Business LAN R800 plus

Lancom Business LAN R800 plus User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info