681038
22
Zoom out
Zoom in
Previous page
1/71
Next page
22 Installation
Inverse flashing means the opposite. The LED lights permanently in the respective
colour and is only briefly interrupted.
Flickering means, that the LED is switched on and off in irregular intervals.
Power
This LED indicates that the device is operational. After the device has been switched on, it
will flash green for the duration of the self-test. After the self-test, either an error is output
by a flashing red light code or the device starts and the LED remains lit green.
Note The power LED flashes red/green in alternation until a configuration pass-
word has been specified. Without a configuration password, the configura-
tion data of the Business LAN R800+ is insecure. Under normal
circumstances, you would assign a configuration password during the basic
configuration (see instructions in the following chapter). For information
about a later assignment of the configuration password see the section
“Security settings” on page 57.
off Device off
green blinking Self-test when powering up
green constantly on Device ready for use
red/
green
blinking alternately Device insecure: configuration password not assi-
gned
red blinking Time or connect-charge reached
Flashing Power LED but no connection?
There's no need to worry if the Power LED blinks red and you can no longer
connect to the WAN. This simply indicates that a preset time or connect-
charge limit has been reached. There are three methods available for unlok-
king:
Reset connect charge protection.
Increase the limit that has been reached.
Completely deactivate the lock that has been triggered (set limit to '0').
If a time or connect charge limit has been reached, you will be notified in LANmonitor. To reset the con-
nect charge protection, select Reset Charge and Time Limits in the context menu (right mouse click).
You can configure the connect charge settings in LANconfig under Management Costs (you will
only be able to access this configuration if 'Complete configuration display' is selected under View
Options…).
You will find the connect charge protection reset in WEBconfig and all parameters under Expert Con-
figuration Setup Charges-module.
Signal for reached time
or connect-charge limit
Power
==!"§==Systems=
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom Business LAN R800 plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom Business LAN R800 plus in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom Business LAN R800 plus

Lancom Business LAN R800 plus User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info