729369
108
Zoom out
Zoom in
Previous page
1/122
Next page
LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 12: Configuring the ISDN and analog interfaces in detail
108
EN
NT mode operation always has to be set manually. With the LANCOM
1722 VoIP, if the ISDN 2 connector is set to 'Off' there may be a con-
nection to ISDN 1 in the case that the device has been set up for life-
line support by means of the DIP switches.
If an ISDN device is attached to an ISDN interface that is set to auto
and is not recognized properly, set the required protocol manually.
12.4 ISDN connection timing
To ensure trouble-free transmission, all of the components in the ISDN system
(LANCOM VoIP Router, upstream and downstream ISDN PBXs, ISDN terminal
devices and external ISDN telephone networks) have to use the same ISDN
timing. In the LANCOM VoIP Router, an ISDN interface in TE mode can take
on the timing of the ISDN line. The TE interface enables the device itself to
behave like a terminal device. In NT mode, the LANCOM VoIP Router can pass
on the on this timing over the ISDN interfaces to any connected terminal
equipment or downstream ISDN PBXs. The NT interface enables the device
itself to behave like an exchange.
Various settings are available to define the ISDN interfaces with which a
LANCOM VoIP Router receives the ISDN timing (to be passed on to the devices
at the NT interfaces).
PCM synchronization bus: Automatically selects one of all TE or (reverse
configured) NT interfaces currently supplying a timing. If the selected
interface stops supplying a timing (e.g. because the bus is inactive), the
LANCOM VoIP Router switches to the next available interface that is sup-
plying a timing.
ISDN/S0 Bus: This setting takes on the ISDN timing from the connection
for use by the LANCOM VoIP Router and further devices connected over
the NT interface. In this way, the timing can be switched through in par-
allel to an existing ISDN PBX at a point-to-point connection.
The selected ISDN interface has to be configured for TE mode.
The ISDN-interface settings contain two more modes which play a particular
role in this context:
DSS1 NT reverse or DSS1 NT point-to-point reverse: When all ISDN
interfaces are operated in NT mode, the timing system runs "freely"
because there is no TE interface to take on the ISDN timing. If in this case
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1823 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1823 VoIP in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info