729369
50
Zoom out
Zoom in
Previous page
1/122
Next page
LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 3: Basic configuration
50
EN
3 Basic configuration
The basic configuration can be performed on a step-by-step basis using a
convenient setup wizard to guide you through the setup process and prompt
you for the required information.
First, this chapter will tell you which information is required for the basic con-
figuration. Use this section to assemble the information you will need before
you launch the wizard.
Next, enter the data in the setup wizard. Launching the wizard and the proc-
ess itself are described step by step — with separate sections for LANconfig
and WEBconfig. Thanks to the information that you have collected in advance,
the basic configuration is quick and effortless.
At the end of this chapter we will show you the settings that are needed for
the LAN's workstations to ensure trouble-free access to the device.
3.1 Which information is necessary?
The basic configuration wizard will take care of the basic TCP/IP configuration
of the device and protect the device with a configuration password. The fol-
lowing descriptions of the information required by the wizard are grouped in
these configuration sections:
TCP/IP settings
protection of the configuration
information related to the Wireless LAN
configuring connect charge protection
security settings
3.1.1 TCP/IP settings
The TCP/IP configuration can be realized in two ways: either as a fully auto-
matic configuration or manually. No user input is required for the fully auto-
matic TCP/IP configuration. All parameters are set automatically by the setup
wizard. During manual TCP/IP configuration, the wizard will prompt you for
the usual TCP/IP parameters: IP address, netmask etc. (more on these topics
later).
Fully automatic TCP/IP configuration is only possible in certain network envi-
ronments. The setup wizard therefore analyses the connected LAN to deter-
mine whether it supports fully automatic configuration.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1823 VoIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1823 VoIP in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info