703327
7
Zoom out
Zoom in
Previous page
1/18
Next page
LANCOM LCOS devices
Installation Guide
2
LANCOM Installation Guide – Copyright
EN
Copyright
© 2019 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved.
While the information in this manual has been compiled with great care, it may not be deemed an
assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified in
the terms of sale and delivery.
The reproduction and distribution of the documentation and software supplied with this product
and the use of its contents is subject to written authorization from LANCOM Systems. We reserve
the right to make any alterations that arise as the result of technical development.
Windows® and Microsoft® are registered trademarks of Microsoft, Corp.
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trade-
marks. All other names or descriptions used may be trademarks or registered trademarks of their
owners. This document contains statements relating to future products and their attributes.
LANCOM Systems reserves the right to change these without notice. No liability for technical errors
and / or omissions.
Products from LANCOM Systems include software developed by the “OpenSSL Project” for use in
the “OpenSSL Toolkit” (www.openssl.org).
Products from LANCOM Systems include cryptographic software written by Eric Young (eay@
cryptsoft.com).
Products from LANCOM Systems include software developed by the NetBSD Foundation, Inc. and
its contributors.
Products from LANCOM Systems contain the LZMA SDK developed by Igor Pavlov.
The product contains separate components which, as so-called open source software, are subject
to their own licenses, in particular the General Public License (GPL). If required by the respective
license, source files for the affected software components are made available on request. To do this,
please send an e-mail to gpl@lancom.de.
LANCOM Systems GmbH
Adenauerstr. 20/B2
52146 Wuerselen
Germany
www.lancom-systems.com
Wuerselen, May 2019
3
LANCOM Installation Guide – Introduction
EN
Introduction
Thank you for purchasing an LCOS-based LANCOM device.
This installation guide describes how to put your LANCOM device into
operation and its initial setup.
Installation includes:
A Positioning and mounting
A Safety advice
The initial setup includes:
A Configuration via LANconfig
LANconfig is the free-of-charge and user-friendly software for
the configuration of LANCOM devices on Microsoft Windows.
LANconfig has a huge spectrum of applications, from the user-friend-
ly commissioning of a single device with installation wizards to
the comprehensive management of large-scale installations.
You can find the download free of charge on our website:
www.lancom-systems.com/downloads/
A Configuration via WEBconfig
WEBconfig is the browser-based configuration user interface that is
available on the LANCOM device and can be used on any operating
system.
A Configuration via the LANCOM Management Cloud
The LANCOM Management Cloud is the management system
that intelligently organizes, optimizes, and controls your entire
network architecture. (licence and working Internet access required)
You can find out more about the LANCOM Management Cloud at:
www.lancom-systems.com/lmc/
The document continues with further information about operating the
device, the documentation, and LANCOM Service & Support.
4
LANCOM Installation Guide – Safety instructions and intended use
EN
Safety instructions and intended use
5
In order to avoid harming yourself, third parties or your equipment
when installing your LANCOM device, please observe the following
safety instructions. Operate the device only as described in the ac-
companying documentation. Pay particular attention to all warnings
and safety instructions. Use only those third-party devices and com-
ponents that are recommended or approved by LANCOM Systems.
Before commissioning the device, be sure to study the Quick Reference
Guide supplied with the hardware. These can also be downloaded from
the LANCOM website (www.lancom-systems.com).
Any warranty and liability claims against LANCOM Systems are excluded
following any usage other than the intended use described below.
Environment
LANCOM devices should only be operated when the following environ-
mental requirements are met:
A Ensure that you comply with the temperature and humidity ranges
specified in the Quick Reference Guide for the LANCOM device.
A Do not expose the device to direct sunlight.
A Ensure that there is adequate air circulation and do not obstruct the
ventilation slots.
A Do not cover devices or stack them on top of one another
A The device must be mounted so that it is freely accessible (for example,
it should be accessible without the use of technical aids such as
elevating platforms); a permanent installation (e.g. under plaster) is not
permitted.
A Only outdoor equipment intended for this purpose is to be operated
outdoors.
5
LANCOM Installation Guide – Safety instructions and intended use
EN
Power supply
Please observe the following before installation, as improper use can lead
to personal injury and damage to property, as well as voiding the warranty:
A Use only the power adapter / IEC power cable mentioned in the Quick
Reference Guide.
A Some models can be powered via the Ethernet cable (Power-over-
Ethernet, PoE). Please observe the relevant instructions in the Quick
Reference Guide for the device.
A Never operate damaged components.
A Turn the device on only if the housing is closed.
A The device must not be installed during thunderstorms and should be
disconnected from the power supply during thunderstorms.
A In emergency situations (e.g. in the case of damage, ingress of liquids
or objects, for example through the ventilation slots), the power supply
must be disconnected immediately.
A Operate the device only with a professionally installed power supply at
an any time accessible power outlet.
Applications
A The device may only be used in accordance with the relevant national
regulations and under consideration of the legal situation applicable
there.
A The equipment must not be used for the actuation, control, and data
transmission of machinery that, in case of malfunction or failure, may
present a danger to life and limb, nor for the operation of critical infra-
structures such as power plants.
6
LANCOM Installation Guide – Safety instructions and intended use
EN
General safety
A Under no circumstances should the device housing be opened and the
device repaired without authorization. Any device with a case that has
been opened is excluded from the warranty.
A The antennas are only to be attached or swapped out while the device
is powered off. Mounting or demounting antennas while the device is
powered on may cause the destruction of the radio module.
A Notes on the individual interfaces, switches, and displays on your
device are available in the supplied Quick Reference Guide.
A Mounting, installation, and commissioning of the device may only be
carried out by qualified personnel.
7
LANCOM Installation Guide – Initial setup
EN
Initial setup
A LANCOM device can be configured conveniently by TCP/IP. The following
configuration paths are available for this:
A LANconfig
A WEBconfig
A LANCOM Management Cloud
4
For devices with a serial interface, the configuration can be con-
ducted with LANconfig or a terminal program.
Configuration via LANconfig
Unconfigured LANCOM devices in local networks (LAN) are detected
automatically. It is very easy to search the LAN for new devices. Click the
button Search now.
In the dialog box that follows, you further specify the settings for the
device search.
4
If LANconfig does not find the device you should check the network
connection and update the IP address of the configuration PC.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lancom 1781VAW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lancom 1781VAW in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lancom 1781VAW

Lancom 1781VAW Quick start guide - English - 1 pages

Lancom 1781VAW Installation Guide - German - 18 pages

Lancom 1781VAW Quick start guide - German - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info