674355

Lanaform Pommy - LA 120120 Manual

8
Zoom out
Zoom in
Previous page
1/68
Next page
8
PLEASE NOTE: DO NOT LEAVE THE DEVICE CONNECTED WHEN YOU ARE NOT USING IT.
CARE AND STORAGE:
If the water is hard, i.e. if it contains too much calcium and magnesium, it may leave a “white powder” in the device and cause frothing
on the surface of the basin, on the transducer (ceramic pellets producing ultrasound) and on the internal walls of the water reservoir.
Frothing on the surface of the transducer means that the device will not work properly.
We recommend:
If the water contains too much calcium and magnesium, it may deposit a “white powder” in the device. If this foam is deposited on the
transducer(s) (ceramic ring(s) producing ultrasounds, diagram 1, point 5), this will prevent the device from working properly.
Maintenance:
We recommend:
1) Using water that has been boiled and cooled or distilled water each time the device is used.
2) Cleaning the reservoir every 3 days and cleaning the transducer every week;
3) Changing the water in the tank regularly so that it stays fresh, and not leaving it there for longer than 2 days.
4) Cleaning the entire device and making sure that all its parts are completely dry when it is not in use.
To clean the transducer:
1) Put 2 to 5 drops of vinegar on its surface and leave them there for 2 to 5 minutes.
2) Brush the foam o the surface with a soft brush. Do not use a hard tool to scrape the surface.
3) Rinse the transducer with clean water.
4) Do not use soap or other basic substances to clean the transducer
To clean the basin:
1) Clean the basin with water using a soft cloth and vinegar if there are foam OR lime scale deposits on the inside.
2) If the foam covers the safety switch, put a few drops of vinegar on it and clean it with a brush.
3) Rinse the basin in clean water.
Storage:
1) Clean and dry the humidier carefully using ultrasound, following the maintenance instructions.
2) Let it dry completely before storing it. Do not store it there is still water in the base.
3) Store the device in a dry, cool place out of the reach of children.
TROUBLESHOOTING
In the event of a malfunction, under normal conditions of use, please refer to the following chart:
Troubleshooting Possible causes Solutions
Not lowing, no mist No current Connect the appliance
The mist intensity control is low. Adjust the mist intensity.
The water level in the groove is too high. Remove the water from the groove.
Water reservoir leaking Close the cover tightly.
Blowing, but no mist No water in the reservoir. Fill the reservoir.
The temperature of the unit is too low. Place the unit in a room at ambient tem-
perature for half an hour prior to use.
EN
Downloaded from www.vandenborre.be
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform Pommy - LA 120120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform Pommy - LA 120120 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info