719226
5
Zoom out
Zoom in
Previous page
1/52
Next page
Bubble Footcare 5 / 52
EN FR NL DE ES IT PL CS SK HU SL HR RU AR FA
of 15 minutes. It must then be turned o so that the motor
can cool down for at least 15 minutes.
· Without medical approval, it is strongly recommended
that the “BUBBLE FOOTCARE” appliance should not be used
by pregnant women, people subject to thrombosis or who
suer from bodily pain for which the cause has not been
identied or by people who wear a heart pacemaker. The
appliance is also not recommended for use by diabetics.
INSTRUCTIONS
1) Details:
Very high quality stylish bubble bath.
Equipped with pedicure accessories.
Practical thanks to its pouring spout.
Maintains heat.
Vibrating massage (with or without water).
Bubble action (70 air jets).
4 removable massage rollers.
Stimulating acupressure surface that massages the
soles of the feet (400 acupressure points).
2) Description of the «BUBBLE FOOTCARE»:
Diagram (Fig 1 & Fig 2):
1 Rotating control switch
2 Accessories compartment lid
3 Rotating head (pedicure accessories)
4 Air jets
5 Acupressure points
6 Pouring spout
7 Power cable
8 Plug
9 Removable rollers
10 Pedicure accessorie
3) Using the «BUBBLE FOOTCARE»:
1 Place the appliance on a at, stable and hard surface with
a non-slip mat nearby in order to prevent the risk of falling.
2 Fill the appliance (with water at the desired temperature)
up to the “MAX” level. Never exceed this level.
3 Check that the appliance is in the “0” position before
plugging it into the mains supply. Also make sure your
hands are not wet and your feet are not in the water.
4 Sit on a chair and place your feet into the water. Never
stand up in the “BUBBLE FOOTCARE”.
5 Then select the type of massage desired:
The functions available are:
Heat + Bubbles (1) (Fig 3):
Turn the switch to position 1.
This function provides a relaxing foot bath thanks to the
generation of bubbles in water that is kept at a constant
temperature.
Heat + Bubbles + Vibrations (2) (Fig 4):
Turn the switch to position 2.
This function provides a unique vibrating massage and a
relaxing foot bath thanks to the generation of bubbles in
water that is kept at a constant temperature.
Vibrations (3) (Fig 5):
Turn the switch to position 3.
This function provides a unique vibrating massage (only
option that can be used with or without water).
Accessories:
To benet from an invigorating and stimulating massage,
use the acupressure points and the four removable rollers
that can be attached by gentle pressure.
A pedicure set (Fig 6 & Fig 8) is also provided comprising:
· A massaging head.
· An abrasive head.
· A head tted with a brush.
In order to t the desired accessory, simply press it
gently onto the rotating head.
In general, the massage should not last more than 10
to 15 minutes.
Once you have nished your massage, return the switch
to the «0» position before unplugging the appliance.
Finally empty the appliance.
MAINTENANCE
Storage:
Place the massage appliance in its box or in a dry place.
Prevent the appliance from coming into contact with
sharp or pointed objects which could damage the outside
surface.
Do not wrap the power cord around the appliance. (This
could cause wear and tear and break the cord).
Cleaning:
Make sure you unplug the device and allow it to cool
down before cleaning it.
Do not immerse the «BUBBLE FOOTCARE» in water or
any other liquid in order to clean it. Use a gentle detergent
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA110412 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA110412 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info