719435
13
Zoom out
Zoom in
Previous page
1/64
Next page
WB PM -110 13 / 64
EN FR NL DE
7 If you do not use the monitor for a long
time, please remove the batteries.
8 It is recommended the performance
should be checked every 2 years or after
repair. Please contact the service center.
9 Clean the monitor with a dry, soft cloth
or a soft cloth squeezed well after
moistened with water, diluted disinfectant
alcohol, or diluted detergent.
10 No component can be maintained by
user in the monitor. The circuit diagrams,
component part lists, descriptions,
calibration instructions, or other information
which will assist the user’s appropriately
qualied technical personnel to repair
those parts of equipment which are
designated repairably can be supplied.
11 The monitor can maintain the safety and
performance characteristics for a minimum
of 10,000 measurements or three years,
and the cu integrity is maintained after
1,000 open–close cycles of the closure.
Troubleshooting (-)
PROBLEM POSSIBLE CAUSE SOLUTION
LCD shows « ER » Cu pressure above mmHg
Measure again after ve minutes.
If the monitor is still abnormal,
please contact the local distribu-
tor or the fac tory
LCD shows « ER  » More than  seconds with cu
pressure above  mmHg
LCD shows « ER  » Inner Memory error
LCD shows « ER  »
Device parameter checking error
LCD shows « ER A »
Pressure sensor parameter error
No repsonse when you press
button or load battery
Incorrect operation or strong
electromagnetic interference
Take out batteries for ve
minutes, and then reinstall all
batteries.
12 It is recommended the cu should be
disinfected 2 times every week if needed
(For example, in hospital or in clinique).
Wipe the inner side (the side contacts
skin) of the cu by a soft cloth squeezed
after moistened with Ethyl alcohol
(75-90%), then dry the cu by airing.
10. EXPLANATION OF
SYMBOLS ON UNIT
The following s ymbols appear in these instructions
for use:
Warning instruction indicating a risk of injury
or damage to health.
Safety note indicating possible damage to the
unit/accessory.
s
Note on important information.
Symbol for” THE OPERATION GUIDE MUST
BE READ”(The sign background colour:
blue.The sign graphical symbol: white)
Symbol for “SERIAL NUMBER
Symbol for “TYPE BF APPLIED PARTS”
(The cu is type BF applied part)
Symbol for “ENVIRONMENT PROTECTION
– Waste electrical product s should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your local Authority
or retailer for recycling advice”.
Symbol for “COMPILES WITH
MDD93/42/EEC REQUIREMENTS”
Manufacturer
Symbol for “EUROPEAN REPRESENTATION”
IP22
The rst characteristic numeral symbol
for “Degrees of protection against access
to hazardous parts and against solid
foreign objects “.The second character-
istic numeral symbol for “Degrees of
protection against ingress of water”
Symbol for “DATE OF MANUFACTURE”
11. LIMITED WARRANTY
LANAFORM guarantees this product against any
material or manufacturing defect for a period of
two years from the date of purchase, except in the
circumstances described below.
The LANAFORM guarantee does not cover damage
caused as a result of normal wear to this produc t. In
addition, the guarantee covering this LANAFORM
product does not cover damage caused by abusive
or inappropriate or incorrect use, accidents, the use
of unauthorized accessories, changes made to the
product or any other circumstance, of whatever sort,
that is outside LANAFORM’s control.
LANAFORM may not be held liable for any type of
circumstantial, indirect or specic damage.
All implicit guarantees relating to the suitability of
the produc t are limited to a period of two years from
the initial date of purchase as long as a copy of the
proof of purchase can be supplied.
On receipt, LANAFORM will repair or replace your
appliance at its discretion and will return it to
you. The guarantee is only valid through LANA-
FORM’s Service Centre. Any attempt to maintain
this product by a person other than LANAFORM’s
Service Centre will render this guarantee void.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA090207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA090207 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info