699083

Lamax Shield Plus Manual

6
Zoom out
Zoom in
Previous page
1/132
Next page
3
Controlling the Security System
The security system can be controlled via SMS, via the Android or iOS app or the control panel.
IMPORTANT: Always enter account names, sensors, RFID tags and remote controls without diacri-
tical marks.Always enter telephone numbers with the international dialling code starting with two
zeros instead of +.
Example: 0044 123 456 789
Operating the Control Panel
System Activation (Normal group)
Press the “LOCK” button.All sensors are activated.
Partial System Activation (Home group)
Press the “HOME” button.The sensors assigned to the Home group are not activated when the control
panel is set to Home Mode.
Disarming the System on the Control Panel
The system can be disarmed on the control panel by entering the four-digit security passcode (default
1234) and pressing the “UNLOCK” button. One beep indicates that the system is disarmed. Three beeps
indicates that the security code has been entered wrongly.
Disarming the System Using an RFID Tag
Hold the RFID tag to the RFID reader (blue circle on the left of the control panel). Successful deactiva-
tion is conrmed by a beep.
IMPORTANT: In order to disarm the system using the RFID tag, the control panel must be connected
to the mains. RFID tags can only be used to disarm the system, anot to arm it.
Recording and Playing Back Voice Memos
Press the “RECORD” button for 3 seconds and record a voice message. Maximum length of a voice
message is 10 seconds. If the message is less than 10 seconds, press the “RECORD” button again when
you have completed the message. Voice message can be played back by holding an RFID tag up to
the reader.
Speed Dial
Press the “CALL” button to immediately call the security company on a preset number. Press “CALL”
again to end the call.
Making a Call
It is possible to directly call any phone using the security system. Just select the phone number on the
control panel and press “CALL”. The call uses the microphone and speaker built into the control panel.
Press “CALL” again to end the call.
Recording the Emergency Call Message
When the control panel alarm is triggered it calls all emergency telephone numbers and plays a mess-
age. To record the message press the “HOME” button, then enter the security passcode (default 1234),
press “HOME” again and nally press “RECORD”. You have 10 seconds to record the message.
Restoring Factory Settings
Restoring factory settings, or doing a “hard reset” is performed whenever the SIM card is changed. This
can also be done manually by pressing the tamper switch at the back of the control panel ve times
in three seconds.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lamax Shield Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lamax Shield Plus in the language / languages: English, German, Polish as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info